Heterocyclic Building Blocks-Tetrahydropyran

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.25850-22-0,2,2-Dimethyltetrahydro-2H-pyran-4-amine,as a common compound, the synthetic route is as follows.

(4) (2E)-3-{3-cyano-4,6-dimethyl-1-[(1R)-1,2,3,4-tetrahydronaphthalen-1-yl]-1H-pyrrolo[2,3-b]pyridin-2-yl}-N-[(4S)-2,2-dimethyltetrahydro-2H-pyran-4-yl]prop-2-enamide(2E)-3-{3-cyano-4,6-dimethyl-1-[(1R)-1,2,3,4-tetrahydronaphthalen-1-yl]-1H-pyrrolo[2,3-b]pyridin-2-yl}-N-[(4R)-2,2-dimethyltetrahydro-2H-pyran-4-yl]prop-2-enamide To a solution of (2E)-3-{3-cyano-4,6-dimethyl-1-[(1R)-1,2,3,4-tetrahydronaphthalen-1-yl]-1H-pyrrolo[2,3-b]pyridin-2-yl}prop-2-enoic acid (861 mg, 2.32 mmol) in THF (8 ml) were added DMF (0.10ml) and oxalylchloride (0.243 ml, 2.79 mmol), the mixture was stirred at room temperature for 1 hour and the solvent was distilled off under reduced pressure. The residue was added under ice-cooling to a solution of 2,2-dimethyltetrahydro-2H-pyran-4-ylamine (600 mg, 4.64 mmol), triethylamine (1.08 ml, 7.71 mmol) and THF (6 ml), the mixture was stirred under ice-cooling for 2 hours, the reaction solution was poured into water and extracted with ethyl acetate. The extract was washed with water and dried over anhydrous magnesium sulfate, and the solvent was distilled off under reduced pressure. The residue was purified by silica gel column chromatography (hexane : ethyl acetate = 2 : 1 to 1 : 1) to separate two kinds of diastereomers. Firstly eluted diastereomer: (2E)-3-{3-cyano-4,6-dimethyl-1-[(1R)-1,2,3,4-tetrahydronaphthalen-1-yl]-1H-pyrrolo[2,3-b]pyridin-2-yl}-N-[(4S)-2,2-dimethyltetrahydro-2H-pyran-4-yl]prop-2-enamide yield 247 mg, yield (rate) 22.1%1H-NMR (CDCl3) delta: 1.24-1.40 (8H, m), 1.80-2.30 (6H, m), 2.59 (3H, s), 2.76 (3H, s), 2.90-3.23 (2H, m), 3.65-3.80 (2H, m), 4.19-4.24 (1H, m), 5.51 (1H, d, J = 8.0 Hz), 6.49 (1H, d, J = 7.5 Hz), 6.68-7.26 (7H, m). IR (KBr) cm-1; 3268, 2215, 1661, 1622, 1588, 1553, 1507, 1427, 1331, 1262, 1198, 735, 748. Later eluted diastereomer: (2E)-3-{3-cyano-4,6-dimethyl-1-[(1R)-1,2,3,4-tetrahydronaphthalen-1-yl]-1H-pyrrolo[2,3-b]pyridin-2-yl}-N-[(4R)-2,2-dimethyltetrahydro-2H-pyran-4-yl]prop-2-enamide Yield (amount) 222 mg, yield (rate) 19.8%1H-NMR (CDCl3) delta: 1.20-1.36 (8H, m), 1.76-2.29 (6H, m), 2.59 (3H, s), 2.76 (3H, s), 2.90-3.16 (2H, m), 3.65-3.80 (2H, m), 4.19-4.23 (1H, m), 5.48 (1H, d, J = 7.8 Hz), 6.50 (1H, d, J = 8.1 Hz), 6.71-7.26 (7H, m). IR (KBr) cm-1; 3268, 2215, 1661, 1620, 1588, 1549, 1507, 1449, 1427, 1368, 1331, 1262, 1198, 750, 733.

25850-22-0, As the paragraph descriping shows that 25850-22-0 is playing an increasingly important role.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP1535922; (2005); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4677-18-3,2-(Tetrahydro-2H-pyran-4-yl)ethanol,as a common compound, the synthetic route is as follows.,4677-18-3

[00107] A mixture of 2-(tetrahydro-2H-pyran-4-yl)ethanol (11.70 g, 89.9 mmol) and pyridinium chlorochromate (38.8 g, 179.8 mmol) in CH2C12 (200 mL) was stirred at 16-19 C for 17 h. TLC (petroleum ether: ethyl acetate = 3: 1) showed the reaction was complete. The mixture was filtered with Kieselguhr and the filtrate (150 mL) was used for the next step directly without further purification.

As the paragraph descriping shows that 4677-18-3 is playing an increasingly important role.

Reference£º
Patent; VITAE PHARMACEUTICALS, INC.; CLAREMON, David, A.; DILLARD, Lawrence, Wayne; DONG, Chengguo; FAN, Yi; JIA, Lanqi; LOTESTA, Stephen, D.; MARCUS, Andrew; SINGH, Suresh, B.; TICE, Colin, M.; YUAN, Jing; ZHAO, Wei; ZHENG, Yajun; ZHUANG, Linghang; (102 pag.)WO2016/61160; (2016); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

1228779-96-1, 3-Nitro-4-(((tetrahydro-2H-pyran-4-yl)methyl)amino)benzenesulfonamide is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(0104) Compound 5K (3.39 g), Compound 5A (1.87 g), 1-ethyl-3-[3-(dimethylamino)propyl]-carbodiimide hydrochloride (2.39 g), and 4-dimethylaminopyridine (1.09 g) were stirred in CH2Cl2 (40 ml) for 24 hours. The reaction was cooled and chromatographed on silica gel with 25-100% ethyl acetate/hexanes, then 10% methanol/ethyl acetate with 1% acetic acid, to give the product (1.62 g, 32%) as a white solid. 1H NMR (300 MHz, dimethylsulfoxide-d6) delta 11.65 (br s, 1H), 8.55 (br s, 1H), 8.04 (d, 1H), 7.89 (dd, 1H), 7.51 (m, 3H), 7.33 (d, 2H), 7.08 (m, 1H), 7.04 (d, 2H), 6.68 (dd, 1H), 6.39 (d, 1H), 6.19 (d, 1H), 3.84 (m, 1H), 3.30 (m, 4H), 3.07 (m, 4H), 2.73(m, 2H), 2.18 (m, 6H), 1.95 (m, 2H), 1.61 (dd, 2H), 1.38 (m, 2H), 1.24 (m, 4H), 0.92 (s, 6H).

1228779-96-1, As the paragraph descriping shows that 1228779-96-1 is playing an increasingly important role.

Reference£º
Patent; AbbVie Inc.; Catron, Nathaniel; Lindley, David; Miller, Jonathan M.; Schmitt, Eric A.; Tong, Ping; US10213433; (2019); B2;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14774-37-9,Tetrahydropyran-4-methanol,as a common compound, the synthetic route is as follows.

To a solution of tetrahydro-2H-pyran-4-ylmethanol (Combi-Blocks, 2.0 g, 17.2 mmol) in 10 mL of of CH2CI2 and 10 mL of of pyridine was added p- toluenesulfonyl chloride (3.5 g, 18.1 mmol) in portions over 15 minutes. The mixture stirred at ambient temperature for 16 hours and was quenched with 10 mL of saturated, aqueous NaHCO3. The layers were separated and the aqueous layer was extracted with three 10 mL portions OfCH2Cl2. The combined organic extracts were dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure to afford the title compound. 1H NMR (300 MHz, dimethylsulfoxide-d6) delta ppm 1.05 – 1.25 (m, 2 H), 1.40 – 1.53 (m, 2 H), 1.73 – 1.94 (m, 1 H), 2.43 (s, 3 H), 3.14 – 3.28 (m, 2 H), 3.71 – 3.84 (m, 2 H), 3.88 (d, J=6.4 Hz, 2 H), 7.48 (d, J=8.5 Hz, 2 H), 7.79 (d, J=8.5 Hz, 2 H); MS (DCI/NH3) m/z 288 (M+NH4)+, 14774-37-9

14774-37-9 Tetrahydropyran-4-methanol 2773573, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; ABBOTT LABORATORIES; WO2009/67613; (2009); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

1245724-46-2, (S)-Tetrahydro-2H-pyran-3-amine hydrochloride is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

DIPEA (6.99 mL, 40.00 mmol) was added to ethyl 6-bromo-4-chloroquinoline-3- carboxylate (3.15 g, 10 mmol) and (5)-tetrahydro-2H-pyran-3-amine hydrochloride (1.376 g, 10.00 mmol) in DMA (30 mL) at 25C under air. The resulting solution was stirred at 80C for 16 h. The reaction mixture was diluted with water (100 mL), the precipitate was collected by filtration, washed with water (20 mL) and dissolved into 250 mL EtOAc/DCM (1 : 1). The formed mixture was dried over MgSCM, filtered and evaporated to afford crude (5)-ethyl 6-bromo-4-((tetrahydro-2H-pyran- 3 -yl)amino)quinoline-3 -carboxylate (3.16 g, 83%) as a white solid. The product was used in the next step directly without further purification., 1245724-46-2

The synthetic route of 1245724-46-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTRAZENECA AB; BARLAAM, Bernard, Christophe; PIKE, Kurt, Gordon; HUNT, Thomas, Anthony; (110 pag.)WO2017/153578; (2017); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

220641-87-2, N-Methyltetrahydro-2H-pyran-4-amine is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of N-methyltetrahydro-2H-pyran-4-amine (80 mg, 0.695 mmol) in DCM (10 mL) and pyridine (0.5 mL) was added 3-bromobenzoyl chloride (0.101 mL, 0.764 mmol) in DCM (3 mL). The mixture was stirred at room temperature for 30 mm, then 50 mL of DCM was added and the mixture was washed with water, 1 N HC1,saturated NaHCO3, brine, and concentrated to give 3-bromo-N-methyl-N-(tetrahydro-2H- pyran-4-yl)benzamide (160 mg, 77% yield). LCMS M = 298.15/300.15. Method G. Rt 2.5 54 mm., 220641-87-2

220641-87-2 N-Methyltetrahydro-2H-pyran-4-amine 6991950, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; BHIDE, Rajeev S.; BATT, Douglas G.; CHERNEY, Robert J.; CORNELIUS, Lyndon A.M.; LIU, Qingjie; MARCOUX, David; NEELS, James; POSS, Michael A.; QIN, Lan-ying; RUAN, Zheming; SHI, Qing; SRIVASTAVA, Anurag S.; TINO, Joseph A.; WATTERSON, Scott Hunter; (532 pag.)WO2016/64957; (2016); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

61363-56-2,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.61363-56-2,2H-Pyran-3,5(4H,6H)-dione,as a common compound, the synthetic route is as follows.

EXAMPLE 51 4-[4-fluoro-3-(trifluoromethyl)phenyl]-1-methyl-4,9-dihydro-1H-isoxazolo[3,4-b]pyrano[4,3-e]pyridine-3,5(6H,8H)-dione The product from Example 45A (0.11 g, 1 mmol),4-fluoro-3-trifluromethylbenzaldehyde and 2H-pyran-3,5(4H,6H)-dione (0.11 g, 1 mmol) were heated in 2 mL of ethanol for 2 days. The reaction mixture was evaporated under reduced pressure and the remaining residue was triturated with methylene chloride. The resulting precipitate was filtered to provide the title compound as the filter cake. 1H NMR (300 MHz, DMSO-d6) delta 3.28 (s, 3H), 4.07 (s, 2H), 4.58 (q, 2H), 4.87 (s, 1H), 7.42 (t, 1H), 7.59 (m, 2H), 10.8 (s, 1H); MS (ESI) m/z 383 (M+H)-; Anal. Calcd for C16H12N2F4O4: C, 51.61;H, 3.22; N, 7.52. Found: C, 51.09;H, 3.11; N,,6.98.

61363-56-2 2H-Pyran-3,5(4H,6H)-dione 325287, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; Drizin, Irene; Altenbach, Robert J.; Carroll, William A.; US2002/7059; (2002); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.33821-94-2,2-(3-Bromopropoxy)tetrahydro-2H-pyran,as a common compound, the synthetic route is as follows.

To a solution of ethyl 1 -(6-(2-(4-hydroxy-2-methylphenethyl) phenyl)pyridin-2-yl)-5- (trifluoromethyl)-1 H-pyrazole-4-carboxylate (600 mg, 1.211 mmol, preparation described in Example 1) in acetone (15 ml) was added Cs2003 (592 mg, 1.816 mmol). After stirring for 30 mi 2-(3-bromopropoxy)tetrahydro-2H-pyran (324 mg, 1.453 mmol) was added andthe reaction was heated overnight at 65C. Analysis of the reaction by TLC showed the reaction was complete. The reaction mixture was concentrated in vacuo, diluted with DCM and washed with H20. The organic layer was dried over anhydrous Na2SO4, filtered and concentrated in vacuo. The product was purified by chromatography on a Isco Companion. The sample was loaded on 10 g Biotage silica (Si) column then the purification was carried out using a Cyclohexane / EtOAc 100/0 to 80/20. The appropriatefractions were combined and concentrated in vacuo to give the required product as a colorless oil (710 mg, 92%). LC/MS rt = 4.62 mm m/z = 554 [M+H]-THP., 33821-94-2

As the paragraph descriping shows that 33821-94-2 is playing an increasingly important role.

Reference£º
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; GOODMAN, Krista B.; KRAUSS, Achim Hans-Peter; LE MONNIER DE GOUVILLE, Anne-Charlotte; DODIC, Nerina; WO2015/33307; (2015); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

4677-18-3, 2-(Tetrahydro-2H-pyran-4-yl)ethanol is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 2-(tetrahydro-pyran-4-yl)-ethanol (13 g, 0.1 mol) in dichloromethane (150 mL) was added pyridinium chlorochromate (43 g, 0.2 mol) portion-wise at room temperature. The dark suspension was stirred at room temperature for 5 h. The reaction mixture was filtered through a short pad of silica gel. The filtrate was concentrated in vacuo to afford (tetrahydro-pyran-4-yl)-acetaldehyde (6.5 g, 50%) as a yellow oil which was used in the next step without purification.

4677-18-3, 4677-18-3 2-(Tetrahydro-2H-pyran-4-yl)ethanol 17750944, aTetrahydropyrans compound, is more and more widely used in various fields.

Reference£º
Patent; Berthel, Steven Joseph; Chen, Li; Corbett, Wendy Lea; Feng, LiChun; Haynes, Nancy-Ellen; Kester, Robert Francis; So, Sung-Sau; Tilley, Jefferson Wright; US2011/144105; (2011); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

1228779-96-1, 3-Nitro-4-(((tetrahydro-2H-pyran-4-yl)methyl)amino)benzenesulfonamide is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,1228779-96-1

General procedure: To a solution of appropriate crude acid (1 eq) in CH2Cl2 wereadded EDCI (3 eq), DMAP (0.3 eq) and DIPEA (3 eq). The solutionwas stirred at room temperature for 0.5 h and compound 23 [7] (0.8eq) was added. The resulting mixture was stirred for another 8 hand water was added. The layers were separated, and the aqueouslayer was extracted with CH2Cl2. The combined organic layer waswashed with brine, dried over anhydrous Na2SO4, filtered, andconcentrated under vacuo. The residue was prified by chromatography(CH2Cl2/CH3OH 40:1) to provide target compounds 27a-i,28a-d and 34a-c.

As the paragraph descriping shows that 1228779-96-1 is playing an increasingly important role.

Reference£º
Article; Liu, Xiaohua; Zhang, Yu; Huang, Wenjing; Luo, Jia; Li, Yang; Tan, Wenfu; Zhang, Ao; European Journal of Medicinal Chemistry; vol. 159; (2018); p. 149 – 165;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics