Tag: 185815-59-2

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.185815-59-2,4-Isobutyldihydro-2H-pyran-2,6(3H)-dione,as a common compound, the synthetic route is as follows.

Preliminary experiments related to the acylative KR of the racemic sec-thiol 1 with glutaric anhydride (2a) in the presence of bifunctional (thio)urea-derived organocatalysts 10-12 and sulphonamide 13 (Table 1 ). Initial results were far from encouraging – acylation proceeded smoothly at low catalyst loading (5 mol%), but resulted in products of low enantiomeric excess (entries 1 -4). Of the four catalysts tested sulphonamide 13 proved superior to the (thio)urea- derivatives and could promote the KR with a very modest selectivity (kfast/kS|0W) of 1.5 (13% ee at 50% conv., entry 4). Further experimentation identified methyl ie f-butylether (MTBE) as the optimal solvent overall, although the KR of 1 was slower but more selective in THF (entries 4-7).[0061] These results represented the first examples of direct catalytic asymmetric KR of a thiol. Subsequently, KR reactions using 3-substituted achiral anhydride electrophiles 3a-5 were tried. This complicated matters considerably, as now control over the formation of 4 possible thioester diastereomers is required. In addition, it allowed for the possibility of a conceptually novel type of catalytic process where both kinetic resolution and anhydride desymmetrisation occur simultaneously. Gratifyingly, this proved to be the case – use of anhydrides 3a-5 resulted in more enantioselective acylations (entries 8-1 1 ), with methyl glutaric anhydride (3a) proving optimal. Using this electrophile the resolved thiol could be isolated in 33% ee at 50% conversion (using either 1 or 5 mol% of catalyst 13), corresponding to S = 2.7.[0062] Product esters 7a and 7b were both formed with excellent enantioselectivity (>90% ee) and with encouraging diastereocontrol (67:33 dr, entry 8). With respect to the anhydride, the desymmetrisation aspect of the reaction was highly selective – the parameter eedesymm (Table 1 ) represents the percentage excess of products derived from attack of the thiol 1 at one prochiral anhydride carbonyl moiety over the other (i.e. the enantiomeric excess of the desymmetrised product if the combined thioester diastereomers were substituted by an achiral (non-hydroxide) nucleophile without racemisation). It is also noteworthy that in the presence of triethylamine as an achiral catalyst the diastereoselectivity is reversed, with 19 as the major diastereomer.[0063] Next the steric and electronic characteristics of the catalyst were systematically varied through the synthesis and evaluation of sulfonamides 14-17. While the electron deficient pentafluorophenyl-substituted catalyst fared a little better than 13, less acidic analogues 15-17 respectively possessed enhanced selectivity profiles (entries 12-15). Given the superiority of the hindered promoter 16, it was decided to accentuate the steric bulk of the sulfonamide further via the synthesis of the novel catalyst 18, which proved almost as active as 13 yet promoted the acylation with a synthetically useful KR selectivity of 8.5 (entry 16). Further optimisation of the reaction conditions (entries 17-19) resulted in the KR of thiol 1 with outstanding selectivity (S = 25.5) – allowing the isolation of resolved (f?)-1 in 90% ee at 54% conversion, along with ester 7a (formed as the major diastereomer, 89:11 dr) in 98% ee, with an excellent attendant eedesymm of 96% (entry 19).; [0064] Thus, under optimum conditions 18 is capable of mediating the highly efficient and selective KR of a substrate class previously outside the orbit of direct enantioselective catalytic acylation, with the simultaneous desymmetrisation of a synthetically useful class of inexpensive achiral anhydride acylating agent – also with excellent enantioselectivity. To demonstrate that the desymmetrisation and kinetic resolution processes are synergistic, we next carried out the process under optimum conditions using the non-prochiral anhydrides 2a, 2b and 3b (entries 20-22). Kinetic resolution was either too slow or proceeded with lower enantioselectivity using these electrophiles.[0065] Attention now turned to the question of substrate scope (Table 2). It was found that variation of the steric bulk of both the aromatic and aliphatic substituent is well tolerated by the catalyst – for example, a-Me, -Et, -‘Pr and -fBu derivatives of benzyl mercaptan (i.e. 1 and 20- 22, entries 1 -4) could be resolved with excellent selectivity (up to S > 50), resulting in the isolation of the unreacted thiol with >90% ee at ca. 50% conversion. A strong correlation between increasing aliphatic substituent bulk and selectivity was observed; however it is noteworthy that even the challenging substrate 20 (where the steric discrepancy between the two carbon-based substituents is smallest) could be resolved with synthetically useful selectivity. Variation of the characteristics of the aromatic substituent produced interesting results – substitution in the para-position either slightly reduces or has no impact onenantioselectivity (23-25, entries 5-7), while steri…

185815-59-2, 185815-59-2 4-Isobutyldihydro-2H-pyran-2,6(3H)-dione 11480690, aTetrahydropyrans compound, is more and more widely used in various.

Reference£º
Patent; THE PROVOST, FELLOWS AND SCHOLARS OF THE COLLEGE OF THE HOLY AND UNDIVIDED TRINITY OF QUEEN ELIZABETH, NEAR DUBLIN; CONNON, Stephen Joseph; PESCHIULLI, Aldo; PROCURANTI, Barbara; WO2011/70028; (2011); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

185815-59-2, 4-Isobutyldihydro-2H-pyran-2,6(3H)-dione is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 2: Preparation of (3R)-5-methyl-3 -(2-oxo-2 (F(I RVl -phenylethyll amino lethvD hexanoic acid compound (24); [0076] A three-necked flask equipped with an addition funnel, thermometer pocket , drying tube and mechanical stirrer, was charged with ethyl acetate (100 ml), (R)-(+)- phenylethylamine (26.69 g, 0.0.22mole) and 4-dimethylaminopyridine (2.69 g, 0.15. mole). The mixture was cooled to a temperature of -50 to -60 C, followed by addition of a solution of 3-isobutyl glutaric anhydride (25 g, 0.147 mole) in ethyl acetate (50 ml), over a period of 25-30 minutes, and stirring for additional 1.5-2 hours, at a temperature of -50 to -60C. The mixture was then extracted with 5-4 percent aqueous solution of NaOH (500 ml), and the aqueous phase was separated. The pH of the aqueous phase was adjusted to 2-2.5 by adding a solution hydrochloric acid (1-12N). The aqueous phase was further extracted with ethyl acetate (1 x 150 ml and 1 x 100 ml), followed by drying the combined ethyl acetates extracts over anhydrous sodium sulfate, and stripping off the solvent to obtain a residue. The residue was crystallized from ethyl acetate and toluene mixture to get 35.43 g (82.87 percent yield) of a white solid of (3R)-5-methyl-3-(2-oxo-2-{[(lR)-l-phenylethyl]amino}ethyl) hexanoic acid with an optical purity of 99.4 percent, as measured by chiral HPLC., 185815-59-2

185815-59-2 4-Isobutyldihydro-2H-pyran-2,6(3H)-dione 11480690, aTetrahydropyrans compound, is more and more widely used in various.

Reference£º
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2007/35789; (2007); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

185815-59-2, 4-Isobutyldihydro-2H-pyran-2,6(3H)-dione is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 540.5 mmol of an anhydride (1k) was dissolved in 10 mL of methyl t-butyl ether at -20 C., 10 mol % of an organocatalyst (Q-BTBSA) was added thereto, 10 equivalents of methanol was added once thereto, and the mixture was stirred at -20 C. for 14 hours. This reaction was quenched using an aqueous solution of dilute hydrochloric acid (1N, 3 mL). The aqueous layer was extracted with ethyl acetate (2¡Á10 mL), and the combined organic layer was dried with MgSO4 and concentrated. The residue was purified by flash chromatography (25% ethyl acetate in normal-hexane) to obtain a hemiester (14 h, 96% yield). According to the known method (H. Han, Tetrahedron Lett. 2004, 45, 3301-3304), it was determined to obtain an enantiomeric excess of 92% by reacting the hemiester and R-1-(1-naphthyl)ethyl amine to be converted to an ester amide corresponding to the hemiester. The enantioselectivity was measured using high performance liquid chromatography (Hypersil, 40:1, hexane:isopropyl alcohol, 1 mL/min., t (main product)=11.4 min., t (side product)=16.2 min.)., 185815-59-2

As the paragraph descriping shows that 185815-59-2 is playing an increasingly important role.

Reference£º
Patent; SUNGKYUNKWAN UNIVERSITY FOUNDATION FOR CORPORATE COLLABORATION; US2011/213151; (2011); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.185815-59-2,4-Isobutyldihydro-2H-pyran-2,6(3H)-dione,as a common compound, the synthetic route is as follows.

Example 9: Preparation of (3RV5-methyl-3-(‘2-oxo-2{rriRVl-phenylethyl1ammo>ethvD hexanoic acid compound (24); [0083] A three-necked flask equipped with an addition funnel, thermometer pocket, drying tube and a mechanical stirrer, was charged with hexane (100 ml), (R)-(+)- phenylethylamine (35.58 g, 0.147mole) and 4-dimethylaminopyridine (0.18 g, 0.00147 mole). The mixture was cooled to a temperature of 0-5C, followed by addition of a solution of 3-isobutyl glutaric anhydride (25 g, 0.147 mole) in hexane (25 ml), over a period of 15-20 minutes, and stirring for additional 1.5-2 hours, at a temperature of 0-5 C. The mixture was then extracted with 2.5-3 percent aqueous solution OfNaHCO3 solution (500 ml), and diluted with water (1000 ml) followed by washing the aqueous phase with toluene (1 x 100 ml and 1 x 50 ml). The pH of the aqueous phase was adjusted to 2-2.5 by adding a 1-12N solution of hydrochloric acid. The aqueoua phase was further extracted with ethyl acetate (1 x 150 ml and 1 x 50 ml), followed by drying the combined ethyl acetates extracts over anhydrous sodium sulfate, and stripping off the solvents, to obtain a residue. The residue was crystallized from ethyl acetate and toluene mixture to get 22.2 g (51.9 percent yield) of a white solid of (3R)-5-methyl-3-(2-oxo-2-{[(lR)-l-phenylethyl]amino}ethyl)hexanoic acid with an optical purity of 99.27 percent, as measured by chiral HPLC., 185815-59-2

185815-59-2 4-Isobutyldihydro-2H-pyran-2,6(3H)-dione 11480690, aTetrahydropyrans compound, is more and more widely used in various.

Reference£º
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2007/35789; (2007); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

185815-59-2, 4-Isobutyldihydro-2H-pyran-2,6(3H)-dione is a Tetrahydropyrans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 13: Preparation of (3R)-5-methyl-3-(2-oxo-2{ [Yl RVl -phenylethyl] amino} ethyl) hexanoic acid compound (24); [0087] A three-necked flask equipped with an addition funnel, thermometer pocket, drying tube and a mechanical stirrer, was charged with methanol (100 ml), (R)-(+)- phenylethylamine (35.58 g, 0.147mole) and 4-dimethylaminopyridine (0.18 g, 0.00147 mole). The mixture was cooled to a temperature of 0-5 C, followed by addition of a solution of 3-isobutyl glutaric anhydride (25 g, 0.147 mole) in methanol (25 ml), over a period of 15- 20 minutes, and stirring for additional 1.5-2 hours, at a temperature of 0-5C. The solvent was stripped off and the residue was extracted with 2.5-3 percent aqueous solution of NaHCO3 solution (500 ml), and diluted with water (1000 ml) followed by washing the aqueous phase with toluene (1 x 100 ml and 1 x 50 ml). The pH of the aqueous phase was adjusted to 2-2.5 by adding a 1-12N solution of hydrochloric acid. The aqueous phase was further extracted with ethyl acetate (1 x 150 ml and 1 x 50 ml), followed by drying the combined ethyl acetates extracts over anhydrous sodium sulfate, and stripping off the solvents, to obtain a residue. The residue was crystallized from ethyl acetate and toluene mixture to get 22.2 g (51.76 percent yield) of a white solid of (3R)-5-methyl-3-(2-oxo-2- EPO {[(lR)-l-phenylethyl]amino}ethyl)hexanoic acid with an optical purity of 99.1 percent, as measured by chiral HPLC.

As the paragraph descriping shows that 185815-59-2 is playing an increasingly important role.

Reference£º
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2007/35789; (2007); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.185815-59-2,4-Isobutyldihydro-2H-pyran-2,6(3H)-dione,as a common compound, the synthetic route is as follows.

Cool the dark brown oil (D number) obtained in the previous step to room temperature.Dilute with 147 g of methyl tert-butyl ether;Add 114g concentrated ammonia water and 215ml water to the 1000ml reaction bottle to cool down;The above mixed droplets are added to the ammonia water under stirring at 25 C or lower.After the dropwise addition is completed, the reaction is continued for 35 minutes at 25 C or lower;After the reaction is completed, the layers are separated, and the organic layer is extracted under reduced pressure. The aqueous layer is slowly adjusted to pH = 1.5 with concentrated hydrochloric acid (about 119 g) under stirring, and a large amount of solid is precipitated. After the completion of the dropwise addition, the temperature is lowered to 0 to 10 C, filtered, and filtered. The cake was washed with 115 ml, and the crude product was dried under reduced pressure. The dried crude product was dissolved in ethyl acetate 615 ml at 70 C, then filtered, cooled and crystallized, cooled to 0 to 5 C, filtered, and the filter cake was washed with 115 ml of iced ethyl acetate, and then dried under reduced pressure.110.9 g of amide (trait: white solid, melting point 106-108 C),The yield was 59.3% (based on ethyl cyanoacetate).

The synthetic route of 185815-59-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Langfang Zekang Pharmaceutical Technology Co., Ltd.; Sun Yuqin; Yang Weimin; (5 pag.)CN109320430; (2019); A;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.185815-59-2,4-Isobutyldihydro-2H-pyran-2,6(3H)-dione,as a common compound, the synthetic route is as follows.

General procedure: To the 0.1 M toluene solution of anhydride (10 mmol), alkaloid (0.1 equiv), xanthene-9-carboxylic acid (0.2 equiv), and alcohol (1.5 equiv) were added. The reaction mixture was stirred until >90% conversion was reached (see Table 3) and the reaction was stopped by the addition of 5% HCl. The organic layer was washed once more with 5% HCl and evaporated. The oily residue was dissolved in 2% K2CO3 and washed successively with EtOAc. The aqueous solution was then carefully acidified with H3PO4 to pH 5.4 and extracted with toluene. The organic extracts were dried over Na2SO4 and evaporated in vacuo.

As the paragraph descriping shows that 185815-59-2 is playing an increasingly important role.

Reference£º
Article; Iv?i?, Trpimir; Novak, Jurica; Do?li?, Nada; Hamer?ak, Zdenko; Tetrahedron; vol. 68; 39; (2012); p. 8311 – 8317;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.185815-59-2,4-Isobutyldihydro-2H-pyran-2,6(3H)-dione,as a common compound, the synthetic route is as follows.

Example 11: Preparation of (3R)-5-methyl-3-(2-oxo-2{[(lR)-l-phenylethyl]amino}ethyl) hexanoic acid compound (24); [0085] A three-necked flask equipped with an addition funnel, thermometer pocket, drying tube and a mechanical stirrer, was charged with methyl isobutyl ketone (100 ml), (R)-(+)-phenylethylamine (35.58 g, 0.147mole) and 4-dimethylaminopyridine (0.18 g, 0.00147 mole). The mixture was cooled to a temperature of 0-50C, followed by addition of a solution of 3-isobutyl glutaric anhydride (25 g, 0.147 mole) in methyl isobutyl ketone (25 ml), over a period of 15-20 minutes, and stirring for additional 1.5-2 hours, at a temperature of 0-5 C. The solvent was stripped off and the residue was extracted with 2.5-3 percent aqueous solution OfNaHCO3 solution (500 ml), followed by washing the aqueous phase with toluene (1 x 100 ml and 1 x 50 ml). The pH of the aqueous phase was adjusted to 2-2.5 by adding a 1-12N solution of hydrochloric acid. The aqueous phase was further extracted with ethyl acetate (1 x 150 ml and 1 x 50 ml), followed by drying the combined ethyl acetates extracts over anhydrous sodium sulfate, and stripping off the solvents, to obtain a residue. The residue was crystallized from ethyl acetate and toluene mixture to get 25.2 g (58.9 percent yield) of a white solid of (3R)-5-methyl-3-(2-oxo-2-{[(lR)-l- phenylethyl] amino }ethyl)hexanoic acid with an optical purity of 99.3 percent, as measured by chiral HPLC.

The synthetic route of 185815-59-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2007/35789; (2007); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.185815-59-2,4-Isobutyldihydro-2H-pyran-2,6(3H)-dione,as a common compound, the synthetic route is as follows.

Example 10: Preparation of (3R)-5-methyl-3-(2-oxo-2(r(lR)-l-phenylethyl1amino>ethyl) hexanoic acid compound (24); [0084] A three-necked flask equipped with an addition funnel, thermometer pocket, drying tube and a mechanical stirrer, was charged with a mixture of cyclohexane and toluene EPO (100 ml) in a ratio of 1 to 1, (R)-(+)-phenylethylamine (35.58 g, 0.147mole) and 4-dimethylaminopyridine (0.18 g, 0.00147 mole). The mixture was cooled to a temperature of 0-5 C, followed by addition of a solution of 3-isobutyl glutaric anhydride (25 g, 0.147 mole) in mixture of cyclohexane and toluene (100 ml) in a ratio of 1 to 1, (25 ml), over a period of 15-20 minutes, and stirring for additional 1.5-2 hours, at a temperature of 0-5C. The mixture was then extracted with 2.5-3 percent aqueous solution of NaOH solution (500 ml), and the aqueous phase was washed with toluene (1 x 50 ml). The pH of the aqueous phase was adjusted to 2-2.5 by adding a 1-12N solution of hydrochloric acid. The aqueous phase was further extracted with ethyl acetate (1 x 150 ml and 1 x 50 ml), followed by drying the combined ethyl acetates extracts over anhydrous sodium sulfate, and stripping off the solvents, to obtain a residue. The residue was crystallized from ethyl acetate and toluene mixture to get 28.7 g (67 percent yield) of a white solid of (3R)-5-methyl-3-(2-oxo-2-{[(lR)- 1-phenylethyl] amino }ethyl)hexanoic acid with an optical purity of 99.34 percent, as measured by chiral HPLC.

185815-59-2 4-Isobutyldihydro-2H-pyran-2,6(3H)-dione 11480690, aTetrahydropyrans compound, is more and more widely used in various.

Reference£º
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2007/35789; (2007); A1;,
Tetrahydropyran – Wikipedia
Tetrahydropyran – an overview | ScienceDirect Topics